Stryker Prime Series 1115 Big Wheel Stretcher
Stryker Prime Series 1115 Big Wheel Stretcher — Manufacturing Specifications
General
Manufacturer: Stryker Corporation
Model: Prime Series 1115 Big Wheel Stretcher
Product type: Patient transport stretcher / EMS/ED stretcher
Intended use: Transport and care of adult and pediatric patients in hospital, emergency department, and pre-hospital settings
Country of manufacture: (varies by production run; refer to unit label for origin)
Dimensions & Weight
Overall length (frame only): approximately 79.5 in (202 cm) — measured with standard mattress/positioning
Overall width:
Frame: approximately 27 in (68.6 cm)
With siderails up: approximately 30–32 in (76–81 cm) depending on rail configuration
Height range:
Lowest (access/transfer): approximately 22–26 in (56–66 cm) (model/config dependent)
Highest (procedure): approximately 36–40 in (91–102 cm)
Deck length (mattress support surface): approximately 76 in (193 cm)
Deck width: approximately 22–24 in (56–61 cm)
Weight (empty): approximately 200–260 lb (91–118 kg) depending on options and accessories
Safe working load (SWL) / maximum patient weight: typically 700 lb (318 kg) or 500 kg variant depending on configuration — confirm on unit label
Frame & Construction
Frame material: high-strength tubular steel with corrosion-resistant finish (powder coat or enamel)
Welded construction with reinforced crossmembers for stability
Radiolucent components: head and central deck sections may include radiolucent materials for imaging compatibility (model dependent)
Finish: chemical- and scratch-resistant surface coating
Deck & Mattress
Deck type: segmented (typically head, torso/hip, and leg sections) for Fowler/backrest articulation and Trendelenburg/reverse Trendelenburg
Mattress: high-density, fluid-resistant foam mattress with antimicrobial top cover; thickness commonly 2.5–3.5 in (6–9 cm)
Mattress cover: nylon/polyurethane or similar, seam-sealed, wipeable, radiolucent insert options available
Safe mattress attachment: straps or retention system to secure mattress to deck during transport
Lifting & Height Adjustment
Hydraulic or electric lift system depending on configuration:
Hydraulic foot or hand-operated pump (manual) or
Electrically powered lift with rechargeable battery and wired handheld control (optional)
Lift capacity: matches SWL (see maximum patient weight)
Height control range: as specified above; smooth, controlled ascent/descent with safety locks
Articulation & Positioning
Backrest (Fowler) articulation: typically 0° to 75°–85° (degree range depends on mechanism)
Knee/leg section articulation: independent adjustable; range typically ±20°–30° depending on model
Trendelenburg / reverse Trendelenburg: powered or manually adjustable; ranges commonly ±12° to ±15°
CPR release: quick-release mechanism to flatten backrest for CPR application
Position controls: foot pedals, hand crank, or electric handset depending on configuration
Stryker Prime Series 1115 Big Wheel Stretcher — Manufacturing Specifications
General
Manufacturer: Stryker Corporation
Model: Prime Series 1115 Big Wheel Stretcher
Product type: Patient transport stretcher / EMS/ED stretcher
Intended use: Transport and care of adult and pediatric patients in hospital, emergency department, and pre-hospital settings
Country of manufacture: (varies by production run; refer to unit label for origin)
Dimensions & Weight
Overall length (frame only): approximately 79.5 in (202 cm) — measured with standard mattress/positioning
Overall width:
Frame: approximately 27 in (68.6 cm)
With siderails up: approximately 30–32 in (76–81 cm) depending on rail configuration
Height range:
Lowest (access/transfer): approximately 22–26 in (56–66 cm) (model/config dependent)
Highest (procedure): approximately 36–40 in (91–102 cm)
Deck length (mattress support surface): approximately 76 in (193 cm)
Deck width: approximately 22–24 in (56–61 cm)
Weight (empty): approximately 200–260 lb (91–118 kg) depending on options and accessories
Safe working load (SWL) / maximum patient weight: typically 700 lb (318 kg) or 500 kg variant depending on configuration — confirm on unit label
Frame & Construction
Frame material: high-strength tubular steel with corrosion-resistant finish (powder coat or enamel)
Welded construction with reinforced crossmembers for stability
Radiolucent components: head and central deck sections may include radiolucent materials for imaging compatibility (model dependent)
Finish: chemical- and scratch-resistant surface coating
Deck & Mattress
Deck type: segmented (typically head, torso/hip, and leg sections) for Fowler/backrest articulation and Trendelenburg/reverse Trendelenburg
Mattress: high-density, fluid-resistant foam mattress with antimicrobial top cover; thickness commonly 2.5–3.5 in (6–9 cm)
Mattress cover: nylon/polyurethane or similar, seam-sealed, wipeable, radiolucent insert options available
Safe mattress attachment: straps or retention system to secure mattress to deck during transport
Lifting & Height Adjustment
Hydraulic or electric lift system depending on configuration:
Hydraulic foot or hand-operated pump (manual) or
Electrically powered lift with rechargeable battery and wired handheld control (optional)
Lift capacity: matches SWL (see maximum patient weight)
Height control range: as specified above; smooth, controlled ascent/descent with safety locks
Articulation & Positioning
Backrest (Fowler) articulation: typically 0° to 75°–85° (degree range depends on mechanism)
Knee/leg section articulation: independent adjustable; range typically ±20°–30° depending on model
Trendelenburg / reverse Trendelenburg: powered or manually adjustable; ranges commonly ±12° to ±15°
CPR release: quick-release mechanism to flatten backrest for CPR application
Position controls: foot pedals, hand crank, or electric handset depending on configuration